Create beautiful, unique designer floors with our EAGLE ACID STAINS!

EAGLE ACID STAIN adds stunning, varied color to existing concrete. The exceptional colors generated through acid staining are permanent and will last a lifetime.

ACID STAIN is produced in 14 stylish colors (see color chart) and creates varied color patterns on concrete by chemicals reacting with the cement on the surface of the substrate. Every concrete floor contains different amounts of minerals and varying porosity, resulting in more vibrant colorations and shades on the same floor. No two floors will ever look alike! The mottled, and varied, appearance of acid stained floors is one of the main reasons acid stained finishes have so much appeal.

The process is somewhat labor intense, but the gorgeous end result and the many compliments you’ll receive from your hard work is well worth the effort!

NET COVERAGE RATE: 200 sq. ft. – 400 sq. ft.

ACID STAIN coverage is dependent on several factors: age, porosity, weather, and composition of the concrete. A definite coverage rate is difficult to determine because every scenario is different.

However, as a general rule, 200 - 400 sq. ft. per gallon should be averaged. If diluted (dilute with water ONLY) 1:1, coverage should yield approx. 600 - 800 sq. ft. per gallon.

COLOR CONSIDERATION

Keep in mind, if you dilute the ACID STAIN the ending color will vary and may not be as vibrant or intense. Also, because mineral content in concrete is different with every substrate, the final color will always slightly vary from the color chart. We always recommend using a small test spot to ensure the color is to your liking before applying to the entire surface.

TECHNICAL & SAFETY INFORMATION

** PLEASE NOTE:

Due to shipping or VOC regulations, EAGLE ACID STAIN is limited to listed states: AL, AR, AZ, CA, CO, CT, DC, DE, FL, GA, ID, IL, IA, KS, KY, LA, MA, MD, ME, MI, MN, MS, MO, MT, NE, NH, NJ, NM, NC, NY, ND, NV, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VA, VT, WA, WV, WI, WY

For more info on VOC regulations in your area click here

ACID STAIN

Name: ACID STAIN
SKU: AE-DA1

SKU: AE-DA1

$70.00

Quantity

EAGLE ACID STAIN

Use on INTERIOR or EXTERIOR concrete surfaces

Transforms plain concrete into stunning marbled elegance

Reacts with the minerals in your concrete for a unique color

14 stylish earth tone colors to choose from

Cleans up with soap and water

Lifelong beauty and easy to maintain
SUGGESTED TOOLS & MATERIALS NEEDED

Pressure Washer using 2500-3000 PSI (if staining outdoor surfaces)

Acid resistant, drip-less pump-up sprayer with conical tip

Masking tape and wax-backed masking paper (if needed)

Medium synthetic bristle brush with long handle

Eye protection and gloves

5-gallon mixing bucket

EAGLE CLEANER DEGREASER & NEUTRALIZER

EAGLE ETCH & CLEAN (if staining interior)

Concrete Sealer: EAGLE SUPREME SEAL for outdoor surfaces. EAGLE ARMOR SEAL for indoor surfaces. Finish ARMOR SEAL with EAGLE CONCRETE POLISH and buff to desired shine.

**NOTE: ALWAYS TEST FIRST – We strongly suggest, before applying any EAGLE products, you should always check the suitability and desired finish on a small test area before starting your application. When applying to a test area, you should use the same surface preparation process and apply using the same equipment you will be using to complete the full general application.

PREPARATION IS KEY

The most important step of an ACID STAIN project is preparation of the surface. The concrete should be at least four weeks old, free from all debris, and clean. DO NOT USE MURIATIC ACID TO CLEAN as you may destroy important minerals necessary to produce the desired color you selected.

Step 1: Clean any dirt, wax, grease, oil and other contaminants that may interfere with the sealer from adhering to the surface. This includes removing any prior coatings (for instructions on removing old sealers click here).

Clean oily concrete with EAGLE CLEANER DEGREASER & NEUTRALIZER. Use a medium to firm bristle brush for heavily oiled spots.

Step 2: Concrete must be porous enough to accept water. If concrete surface is smooth (similar to a garage floor or interior floors), it will be necessary to etch the substrate using EAGLE ETCH & CLEAN. Dense concrete surfaces may require mechanical preparation to accept sealer.

Step 3: PRESSURE WASH. ALWAYS rinse outdoor surfaces well using a pressure washer with 2500-3000 psi. It is recommended to allow 24 hours for concrete surface to completely dry after pressure washing.

For indoor floors, ensure floors are thoroughly rinsed.

Step 4: Mask any adjacent areas you DO NOT want stained for over-spray with masking tape and masking paper. This includes floors and walls. Use duct tape over masking tape to prevent possible bleeding.

APPLICATION

An EAGLE ACID RESITANT SPRAYER should be used.

Dampen concrete with water prior to application of acid stain, but do not puddle.

Spray in an overlapping manner, maintaining a wet edge until entire area is covered.

Allow ACID STAIN to react for at least 6 hours.

NOTE: It’s perfectly okay to apply EAGLE ACID STAIN one day and then start the cleaning phase the following day. Clean residue thoroughly and pour water onto floor to approximate the final color. If darker color is desired, apply a second coat of ACID STAIN.

Concrete must be fully neutralized. Clean residue from floor with EAGLE CLEANER DEGREASER & NEUTRALIZER using an acid resistant synthetic bristle brush. Repeat. Rinse with clean water and mop up excess water. A Wet-Vac may be used for indoor areas. Rinse with clean water until rinse water is free of color. Concrete must be completely free of residue. Expect to rinse with clean water several times. Once dry, test the readiness of the concrete by wiping floor with a white cloth. If it shows residue rinse and dry again. Repeat until no residue remains.

EAGLE ACID STAIN HOW TO VIDEO

CLEANUP

Clean up tools with water.

MAINTENANCE

Clean sealed surface with water only. Reseal surface as needed, but not more than every two years to prevent buildup of sealer.
24 HOUR & EMERGENCY INFORMATION

INFOTRAC 1-800-535-5053

WARNING: Harmful if swallowed. Avoid breathing mist.

EYE, SKIN AND RESPIRATORY IRRITANT

KEEP OUT OF REACH OF CHILDREN

FIRST AID

Skin: Remove contaminated clothing and rinse the affected area for at least 20 minutes. Thoroughly wash with soap and water until no evidence of the chemical remains. For chemical burns, cover with proper dressing and bandage. Call a physician.

Eyes: Flush with water for 20 minutes lifting upper and lower eyelids occasionally. Continue irrigation with normal saline until pH returns to normal. Call a physician.

Inhalation: Remove to fresh air. Administer artificial respiration if necessary. Call a physician.

Ingestion: Drink large amounts of water or milk to dilute the acids. If vomiting persists, take fluids repeatedly. Ingested acid must be diluted 100:1 to render harmless to tissues.

See Safety Data Sheet for more information

TECHNICAL DATA

Color/Type:              Colored Liquid

Active Content: Hydrochloric Acid

Total Solids:             N/A

VOC: <0 g/L

Flash Point: N/A

Freeze Point: 32° F

Storage:                   Inside, well ventilated. Keep container in dry area.

Shelf Life:                 2 years in tightly sealed, unopened container

DOT: UN3264, Corrosive Liquid, Acidic, Inorganic, N.O.S. (hydrochloric acid), 8, PGII

STORAGE AND HANDLING

AVOID FREEZING. DO NOT modify sealer mix with other chemicals. Store in a cool dry place. Store material in its original container. Keep container tightly sealed when not in use. Published shelf-life based upon upright storage of manufacturer-sealed containers kept in a cool dry area. Store in temperatures from 45⁰F to 100⁰F. Always dispose of unused product and container in accordance with local, state and federal guidelines.
Sealer Type:

N/A

Net Weight (lbs.):
5 Gallon   N/A
1 Gallon   9

Substrate Surface Type:
Smooth Troweled   Yes
Textured or Stamped   Yes
Broom Swept   Yes
Exposed Aggregate   NO
Pavers   Yes

Number of Coats:

1

Time Between Coats:

N/A

Application Method:

Spray

Available Color(s):

14 Colors

Interior/Exterior:

Both

Sheen:

Flat

Dry to Touch:

6-8 hrs.

Foot Traffic:

Approx. 6-8 hrs.

Vehicle Traffic:

48 hrs.

Water/Solvent Base:

Water

Low VOC:

YES

Odor Type:

Low Odor

Warranty:

None
FREE SHIPPING is Standard UPS Ground shipping on parcel and residential delivery for all purchases over $50.00 made on eaglesealer.com, and does NOT include EXPRESS or EXPEDITED shipping. Some exclusions apply. Due to Federal DOT shipping regulations with paint related products, overnight, air deliveries or Solvent Based Low VOC sealers are NOT available for standardized shipping. Please contact our office for shipping options. EAGLE reserves the right to change or end this offer at any time.

EAGLE cannot ship to APO/FPO, P.O. Boxes, Alaska, Hawaii or U.S. Territories. For most shipments, please allow 1-2 business days for order processing and 3-5 business days for standard ground delivery in addition to order processing time. Holiday deliveries may be delayed so please take into consideration.

RETURN POLICY

If you would like to return any EAGLE product, we will issue a refund under the following conditions: (1) the product is returned to our facility within 30 days from the receipt of the product. (2) The product must be returned unopened and in its original condition. (3) Customer is responsible for return shipping charges, and a 20% restocking fee per order. NO EXCEPTIONS. (4) A refund will be issued within 7 days of returned product received by EAGLE I.F.P. Company, minus the 20% restocking fee AND minus return shipping charges incurred. Collect shipment will not be accepted. Refund will be issued to original payment method ONLY. Return intructions here.

ACID STAIN

DETAILED PRODUCT INFO

PREPARATION & APPLICATION

SAFETY & TECHNICAL INFO

SPECIFICATIONS

SHIPPING/RETURNS INFO

WARRANTY/DISCLAIMER